The BR-800 has the ability to record 4 tracks simultaneously onto the installed SD memory card. This will be audio coming from inputs 1 through 4 on the back panel such as microphones, keyboards, drum machines, etc. To setup the BR-800 to record 4 tracks simultaneously:

1. Lower the MASTER fader.
2. Connect your microphones and/or external audio devices into inputs 1 through 4 on the back panel of the BR-800.
3. Press MENU.
4. Use the Cursor arrow buttons to select “INPUT SELECT”and then press ENTER.
5. Use the Cursor arrow buttons and the data dial to make the following settings on the screen:
   
   INPUT  :  INPUT 1-4
   MODE  :  4TRACK REC

6. Press EXIT twice.
7. Adjust the INPUT SENS knobs for inputs 1 through so that their red PEAK indicators light briefly at the loudest sounds of the audio device connected (e.g. while playing the device or singing into the mic).
8. Turn the REC LEVEL knob to the 12 o’clock position, and then slowly raise the MASTER fader.
9. Press one of the mono track REC buttons (i.e. track 1, 2, 3, 4) to select the tracks 1 through 4 for recording. Be sure that the selected buttons are lit solid red and not blinking.
10. Press REC and then press PLAY. Recording will begin.
11. Press STOP to stop recording.