欢迎访问BOSS中文网站 - 支持 - RC-5 - 更新 & 驱动

RC-5 System Program ( Ver.1.10 )

HOW TO KNOW THE VERSION

Before you start, check the system program version of your RC-5.

Connect the AC adaptor.
Hold down the [ SETUP ] button , and connect a plug to the OUTPUT A jack.
The version information is displayed on the screen.
* The OUTPUT A jack combines with the power switch.
Disconnect the plug from the OUTPUT A jack.

UPDATE HISTORY

[ Ver.1.10 ] DEC 2023

Additional Functions

The tempo calculation method has changed when recording with no timing reference (rhythm/click off).
When the first track is recorded, the tempo is calculated and adjusted based on the memory's current tempo setting. This provides a more accurate tempo and measure calculation, eliminating unintentional half-time or double-time results.

Bug Fixes
The following bugs were fixed.

Fixed an issue where the rhythm pattern specified for an ASSIGN target may not work correctly.
Fixed an issue where the memory’s tempo is not set correctly when importing WAV files from BOSS Tone Studio.
Fixed several issues that could cause a freeze and/or system error message.

[ Ver.1.06 ] JUL 2021

Bug Fixes
The following bugs were fixed.

When importing WAV files via USB connection, time stretching may be applied to the output audio.
The stability of operation was improved.

WHAT YOU WILL NEED TO UPDATE YOUR RC-5

RC-5
USB cable
* The update is carried out with the unit and the computer connected via USB.
Provide a cable suitable for connection to the computer you're using.
Computer (Windows or Mac) equipped with a USB port compliant with USB 2.0.
AC Adaptor ( PSA-S Series : optional)

CAUTION WHEN PERFORMING THE UPDATE

Never apply this update data to any product other than the RC-5. This update data may destroy the data or system program of other products.
Never power-off your RC-5 while the update is in progress!
If a power failure or similar accident occurs during the update process, the RC-5 won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

GETTING THE UPDATE FILE

Download the file named "rc5_sys_v110.zip".
The downloaded file is an archive file in zip format. Right-click to select Extract All, and then follow the instructions.
When expansion ends, a folder named rc5_sys_v110 and containing the necessary update data appears.

PROCEDURE FOR THE UPDATE

Caution

You must not rename the extracted files.
Never turn off the RC-5's power while the update is in progress. Otherwise the system program or the RC-5 itself may be destroyed.

Please install the extracted system program files into your RC-5 according to the following procedure.

Connect the RC-5 to your computer with the USB cable.
Hold down the [ TEMPO ] button and [ SETUP ] button, and connect a plug to the OUTPUT A jack.
Then the message "RC-5 Updater CONNECTED." appears on the RC-5's display, and a "BOSS RC-5" icon (drive) appears on the computer.
Open the BOSS RC-5 icon.
"Removable Disk (*:)" may appear instead of the BOSS RC-5 icon.
Copy (drag and drop) all the files included in the "rc5_sys_v110" folder into the "BOSS RC-5" icon.
* Do not copy the "rc5_sys_v110" folder.
Disconnect the BOSS RC-5 from the computer.
With Windows
Right-click on the "BOSS RC-5" icon in My Computer (or the "Removable Disk (*:)" icon) and execute "Eject."
With macOS
Drag the "BOSS RC-5" icon to the Trash icon in the Dock.

When ejection of the USB drive is complete, the message "UPDATE ?" appears on the RC-5's display.
Make sure the message "UPDATE ?" is displayed, then go on to the following step.
Disconnect the USB cable.
Press [ MEMORY/LOOP LEVEL ] knob to start the update process.
When the update is complete, the message "COMPLETE" appears on the RC-5's display.
Disconnect the plug from the OUTPUT A jack.
This completes the update operation. The new system program runs at the next startup.
Follow the procedure for verifying the version to verify that the version has been updated.

Roland软件 最终用户许可协议

本协议为用户（包括自然人及法人）与逻兰（上海）电子有限公司（以下简称Roland）之间订立的协议。

请在下载或安装前认真阅读本协议。如果您不同意本协议条款，请不要下载、安装或使用相关资料。如果您下载、安装或使用了相关资料，则视为您已同意本协议的所有条款。

同时，本协议的所有条款，均不含有限制包括免费软件或开源软件著作权人在内的其他著作权人（以下简称其他著作权人）所授权给用户的权利之内容。

1. 使用许可
Roland授于用户在由用户本人所拥有或管理下的个人计算机、乐器产品或其他设备（以下简称设备）上，使用与本协议一同获取的Roland软件产品（以下简称本软件）的使用权（供私人使用的、非排他性和不可转让的使用权）。

2. 著作权
本软件的著作权为Roland或其他著作权人所有保有，并受中华人民共和国著作权法以及国际条约保护。本协议中未规定的各项权利均由Roland或其他著作权人完全保留。本软件的著作权等知识产权不向用户转移。

3. 使用限制
（a）用户不得对本软件以及著作权表示的部分、或全部内容通过修改、变更、反编译、逆向工程、反汇编等方式进行二次创作。
（b）用户不得对第三方授权二次使用、销售、发布、租赁或转让本软件。
（c）用户不得因任何目的复制本软件。用户因尝试复制本软件所发生的损害，Roland不承担任何责任。

3.2 开放源代码软件和其他第三方软件
（a）本软件可能会使用开放源代码软件和其他第三方软件(以下简称为"OSS等")。
（b）如上一段所述的“OSS等”，将受到开放源代码软件等许可 (以下简称为"OSS许可")的限制，您应当遵守该“OSS许可”。
（c）如果本许可协议的条款与“OSS许可”的条款有任何差异，则差异部分应当以“OSS许可”的表述为准，本许可协议的条款将不再适用。

4. 限制保证 
Roland、Roland关联公司、其代理经销商（以下简称Roland等）针对本软件的错误、漏洞等问题、以及对商品性或特定目的的适配，不提供任何明示或暗示的保证。

5. 责任限制
(a) Roland等针对本软件的使用、或无法使用所发生的直接的、派生的、附随的、或间接的损害（包括但不限于丢失数据、其他的金钱损失等），除法律规定应当归责于本公司的事由外，无论通常损害或特别损害，不承担任何责任。上述条款，也同样适用于Roland可能在事前已知晓损害发生的可能性之情形。
(b) Roland等针对本软件的错误、漏洞等缺陷不负有修正义务。
(c)Roland等对用户在使用本软件时与第三方之间产生的争议不承担任何责任。 当发生争议时，应当由Roland等以外的直接当事方自行解决。

6. 协议解除
如用户违反本协议，则本协议将自动中止并解除。如遭受损害，Roland等有权向用户追索赔偿。在此情况下，用户必须立即停止使用本软件，并删除本软件的所有拷贝、副本。

7. 准据法
(a) 本协议准据法为中华人民共和国国内法。但是与法律准据有关的通则法除外。
(b) 本协议中的部分条款因法律规定无效的情况下，其他条款的效力仍然存续。
(c) 因本协议履行所发生的Roland等与用户之间的争议，应当由Roland与用户以诚意协商解决。协商不成的，应当起诉至上海市浦东新区人民法院。

8. 本协议的变更
Roland有权因任何理由变更本协议条款。变更后的本协议，自Roland在互联网页面上表示之时点起生效。用户在本协议变更生效后使用本软件的，视为同意本协议变更后的所有条款。

RC-5 System Program ( Ver.1.10 )

支持

快速链接