RC-300 Driver Ver.1.0.1 for Windows 10/11
Important Nortice
The "RC-300 Driver Ver.1.0.1 for Windows 10/11" requires that your RC-300 has been updated to the Version 1.03 or later.
To use this driver, you must set the USB Mode of the RC-300 to "AUDIO."
HOW TO INSTALL THE DRIVER
Download and install the driver from this page.
- Read the software license agreement at the bottom of the screen and select the "I AGREE..." check box.
- Click the "Download" button to download the driver (rc300_w11d_v101DL.zip).
- Right-click the downloaded file and select "Extract All", and then follow the online instructions.
The extracted folder contains the installer "Setup.exe".
The installation method for the driver is described in the "README.txt" file in the extracted folder. Please read this before installing the driver.
ACTION TO TAKE AFTER INSTALLING
For information on what to do after installing the driver, refer to Readme.htm, which is created after installation.
* Please note that the information in Readme.htm related to "installing" is based on the case where the driver is automatically downloaded over the Internet.
* The contents described in Readme.htm may differ from those on this page. For the latest information, see the following on this page.
* Please note that the information in Readme.htm related to "installing" is based on the case where the driver is automatically downloaded over the Internet.
* The contents described in Readme.htm may differ from those on this page. For the latest information, see the following on this page.
UPDATE HISTORY
[ Ver.1.0.1 ] 2023/05
Support for Windows(R) 11.
* The driver for Microsoft(R) Windows(R) 10 (32-bit Edition) was not changed. It remains at version 1.0.0
* The driver for Microsoft(R) Windows(R) 10 (32-bit Edition) was not changed. It remains at version 1.0.0
SYSTEM REQUIREMENTS
This driver has the following requirements.
Operating System
Microsoft(R) Windows(R) 11
Microsoft(R) Windows(R) 10
* Windows 10 Mobile is not supported.
Microsoft(R) Windows(R) 10
* Windows 10 Mobile is not supported.
Computer
Windows-compatible PC equipped with USB port
* ARM-based PCs are not supported.
* It cannot be used in a virtual Windows environment.
* Windows running on Mac is not supported.
* ARM-based PCs are not supported.
* It cannot be used in a virtual Windows environment.
* Windows running on Mac is not supported.
- Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
- All product names mentioned in this document are trademarks or registered trademarks of their respective owners.