Support

RC-300 Driver Ver.1.0.3 for macOS 10.13 / 10.14


Important Nortice
The "RC-300 Driver Ver.1.0.3 for macOS 10.13 / 10.14" requires that your RC-300 has been updated to the Version 1.05 or later.

 
RC-300 System Program

To use this driver, you must set the USB MODE of the RC-300 to "AUDIO."
If you have already installed the driver under macOS High Sierra (macOS 10.13), reinstalling the driver is not necessary.
With macOS Mojave (macOS 10.14), the system can be used as-is.

Installing the Driver
The downloaded file is an archive file. Information on how to use it is inside the Readme.htm file created after expanding the downloaded file.
Before installing the driver, be sure to read the Readme.htm(*) file.
* The information in Readme.htm might differ from what is on this page. For the most up-to-date information, refer to this page.

During driver installation under macOS Mojave (macOS 10.14), the message "for macOS 10.13" or "This is a driver for using ******* on macOS 10.13." might be displayed on the installation screen, but the software can be used without problem on macOS Mojave (macOS 10.14).
* The "*******" portion contains the model name for the driver being installed.

After downloading the driver, follow the installation procedure for the version of macOS that you're using.
 
 
System Requirements
This driver has the following requirements.

* Please also check the System requirements for the audio/MIDI application and the operating system you're using.
 
Operating System
macOS 10.13 / macOS 10.14
Computer
Apple Mac series computer with on-board USB

* Even if connected to a USB 3.0 port, the performance of the product will not change.
* Mac computers running Microsoft Windows are not supported.
 
* Apple, Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
* macOS is trademark of Apple Inc.
* All product names mentioned in this document are trademarks or registered trademarks of their respective owners.
 

支持

快速链接