eBand JS-10 Driver Ver.1.0.0 for Windows 7/Vista/XP
This is the eBand JS-10 driver for Microsoft Windows 7 / Vista / XP.
This is the JS-10 driver for Microsoft Windows 7 / Vista / XP. To use this driver, you must set the USB Mode of the JS-10 to "AUDIO."
System requirements
This driver has the following requirements.
Operating System
Microsoft(R) Windows(R) 7 32-bit Edition (Service Pack 1 or later)
Microsoft(R) Windows(R) 7 64-bit Edition (Service Pack 1 or later)
Microsoft(R) Windows Vista(R) 32-bit Edition (Service Pack 2 or later)
Microsoft(R) Windows Vista(R) 64-bit Edition (Service Pack 2 or later)
Microsoft(R) Windows(R) XP Home Edition (Service Pack 3 or later)
Microsoft(R) Windows(R) XP Professional (Service Pack 3 or later)
ComputerMicrosoft(R) Windows(R) 7 64-bit Edition (Service Pack 1 or later)
Microsoft(R) Windows Vista(R) 32-bit Edition (Service Pack 2 or later)
Microsoft(R) Windows Vista(R) 64-bit Edition (Service Pack 2 or later)
Microsoft(R) Windows(R) XP Home Edition (Service Pack 3 or later)
Microsoft(R) Windows(R) XP Professional (Service Pack 3 or later)
Windows-compatible PC equipped with USB 2.0 port
* Intel chipset recommended.
* JS-10 may not perform to its full specs when used with an added USB 2.0 interface card.
* This product cannot be used with a USB 3.0 port that is not compatible with USB 2.0 specification.
* If this product does not work correctly when connected to a USB 3.0 port, you will need to connect it to a USB 2.0 port.
* Even if connected to a USB 3.0 port, this product will operate as a USB 2.0 device; the performance of the product will not change.
* This driver cannot be used in a virtual Windows environment, such as Windows XP Mode (Virtual Windows XP) or Virtual PC.
* Mac computers running Microsoft Windows are not supported.
* Intel chipset recommended.
* JS-10 may not perform to its full specs when used with an added USB 2.0 interface card.
* This product cannot be used with a USB 3.0 port that is not compatible with USB 2.0 specification.
* If this product does not work correctly when connected to a USB 3.0 port, you will need to connect it to a USB 2.0 port.
* Even if connected to a USB 3.0 port, this product will operate as a USB 2.0 device; the performance of the product will not change.
* This driver cannot be used in a virtual Windows environment, such as Windows XP Mode (Virtual Windows XP) or Virtual PC.
* Mac computers running Microsoft Windows are not supported.
- Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
- ASIO is a trademark of Steinberg Media Technologies GmbH.
- All product names mentioned in this document are trademarks or registered trademarks of their respective owners.