CUBE Street II System Program ( Ver.1.05 )
HOW TO TELL THE VERSION
Please check the version of the system working on your CUBE Street II before downloading the archive file.
- Hold down [ TUNER ] and the LOOPER [ STOP ] button and turn on the [ POWER ] switch.
If the system is at version 1.05, the [ TUNER b ] LED and the [ TUNER ? ] LED light up. - Turn off the [ POWER ] switch.
UPDATE HISTORY
[ Ver.1.05 ] NOV 2021
Bug Fixes
The following bugs have been fixed.
The following bugs have been fixed.
- When the functional extension is made to set the looper so that recording up to 90 seconds is possible, when 50 seconds or more have been recorded, the loop performance becomes fixed at 90 seconds.
WHAT YOU WILL NEED TO UPDATE YOUR CUBE Street II
- CUBE Street II
- USB cable
* The update is carried out with the unit and the computer connected via USB.
* Provide a cable suitable for connection to the computer you're using. - Computer (Windows or Mac) equipped with a USB port compliant with USB 2.0.
CAUTION WHEN PERFORMING THE UPDATE
- Never apply this update data to any product other than the CUBE Street II. This update data may destroy the data or system program of other products.
- Never power-off your CUBE Street II while the update is in progress!
If a power failure or similar accident occurs during the update process, the CUBE Street II won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs. - We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.
GETTING THE UPDATE FILE
Please open/extract the downloaded "cube_st2_sys_v105.zip" file on your computer to get the "cube_st2_sys_v105" folder.
Please make sure you have unzipped the downloaded update file.
Please make sure you have unzipped the downloaded update file.
PROCEDURE FOR THE UPDATE
Caution
- You must not rename the extracted file.
- Never turn off the CUBE Street II's power while the update is in progress. Otherwise the system program or the CUBE Street II itself may be destroyed.
Please install the extracted system program file into your CUBE Street II according to the following procedure.
- Connect the computer to the USB port.
- Hold down [ LOOPER ] button and turn on the power.
The [ TUNER ? ] LED flashes and a CUBE-ST2 drive appears on the computer's screen. - Copy the two update files (CUBE-ST2.BIN and ROMINFO.TXT) to the root folder of the CUBE-ST2 drive.
- Detach the USB cable from the USB port.
* Be sure to detach the cable at the point of connection with the USB port.
The update starts. While the update is in progress, the [ TUNER ? ] LED lights up and the [ TUNER ? ] LED blinks.
When the [ TUNER ? ], [ TUNER ? ], and [ TUNER ? ] LEDs all blink simultaneously, the update is finished.
* Never switch off the power while the update is in progress. There is risk of the unit becoming unstartable. - Turn off the power.