It's important to choose the appropriate Output Selection so it matches as close as possible to what the GT-100 is connected to. For example, if you have the GT-100 connected to a PA system, you would choose "LINE/PHONES." Use the following steps to set the Output Select.


1. Press SYSTEM.

2. Turn Knob 4 counter-clockwise until "Output Select" is highlighted.

3. Turn Knob 8 to optimize your GT-100 for the device you're connecting it to.

JC-120
SMALL AMP
COMBO AMP
STACK AMP
JC-120 RETURN
COMBO RETURN
STACK RETURN
LINE/PHONES

4. Press EXIT when you are finished. The new setting is saved automatically.

5. Turn the GT-100's OUTPUT LEVEL knob clockwise.

6. Raise the volume of your amp or mixer to the desired level.